Cabinetwork and Joinery: Comprising Designs and Details of Construction, with 2021 Working ... by Paul N Hasluck

Author:Paul N Hasluck
Language: eng
Format: epub
Publisher: Cassell and compnay , limited
Published: 1907-03-25T05:00:00+00:00

Fig. BB6.—Two-tiered Bookcue Table.

view of the table,^from the left side, is shown at Fig. 908. The extreme dimen-Bionaare : length, 3 ft. 2 in. ; width, 1 ft. 8 in.; and height, 2 ft. 4 in. The six legs are 2 ft. S in. long, and 2 in. square in section at the widest part. The four legs on the right are left square for a distance of 1 ft. 5 in. from the top, and the other two for a distance of 7 in., from which points they taper to IJ in. at about 4 in. from the bottom; here the wood slopes outwards to the full thickness on all six alike. If casters are required, the taper should be carried to the end.

rails run a groove i in. deep and J in. wide, i in. from the outer edge, for the end board (see Fig. 969); and in the rear face of the leg, and at a distance of 8 in. from the bottom, make a mortice for thej bottom rail, i in. by i in. by 1 in. deep. Finally bore two holes, J in. in diameter and i in. deep, for the dowels of the angle brackets, IJ in. and 3 in. below the mortices of the second rails. Tlic rear left leg (Fig. 97tt) is similar to the other, but it has an additional groove for the bwjk boards and an additional mortice for t&e back bottom rail, while dowel holes toi/ua bracket are needed

WEITINQ TABLES AND OFFICE FUHNITUHE.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.